Looking to Get in Shape or Lose Weight? Try our BMI and Weight Loss Calculator!

How to Reset Treadmills

By Brenda Priddy

Treadmills are common in many American homes. They provide the convenience of exercise right at home. However, treadmills often go unused for long periods of time. If this happens, sometimes the console of the treadmill needs to be reset. Resetting the software is easy. In a few minutes your treadmill can once again be fully operational.

Unplug the treadmill. Locate the console key and place the safety or reset key into the treadmill console. Replace any parts that need replacing, or move on to the next step.

Locate the reset switch on the underside of the treadmill console. Usually the button is large enough to trigger with a pencil eraser or Q-tip. Plug the treadmill plug back into the wall. Use the Q-tip to press the reset button. It may be necessary to hold the reset button down for a few seconds. "CL11" will appear in the display of the treadmill.

Press the reset button one more time with the Q-tip. "CL21" should appear on the screen. Press the enter key. The display will change again and show "CL22." Keep pressing the enter key until the numbers cycle through to the number "CL26." Press enter one more time. The letter E should appear on the display screen.

Press enter twice more. The letters "SS" should appear on the screen. When this happens, press the start/stop key. Making sure to keep well away from the tread, press enter to start the treadmill. The treadmill will start on its own. The treadmill will stop on its own after a few seconds. When it stops, press the power key two times. Remove the safety key and put in a safe place. Your treadmill is reset.

Cite this Article A tool to create a citation to reference this article Cite this Article

Related Articles

More Related