Looking to Get in Shape or Lose Weight? Try our BMI and Weight Loss Calculator!

How to Make a Trampoline Screen

By David Ferguson

Making a trampoline screen is a cost-effective way of protecting yourself and others from injury when trampolining. Enclosing the trampoline area, a trampoline screen is designed to prevent falling and must be sufficiently sturdy and well-built to be fit for purpose. With a few basic everyday supplies and about two hours of labor, building your own trampoline screen can be a straightforward process.

Measure around the edge of your trampoline with a measuring tape to calculate the length of nylon netting required. Multiply this by 10 feet in height, which will give you the total area and dimensions of netting you will require to make your trampoline screen.

Position the wooden stakes at even intervals around the circumference of your trampoline and hammer into the ground to around 18 inches in depth. Make sure your stakes are vertical using a spirit level and are as close as possible to touching the outside edge of your trampoline without making contact. This will allow the nylon netting to be fed between the stake and the trampoline edge.

Wrap 3 feet of string tightly around the top of the first stake, running through the edge of the nylon netting. Secure a tight knot around the stake and repeat the process for the middle and the bottom of the stake to ensure the netting is firmly secured to it.

Stretch the nylon netting to the next post so that is is taut, and secure with rope in the same fashion as the first post.

Repeat the stretching and tying process until the nylon netting is secured around the circumference of the trampoline. At the last stake, secure the netting at just the top and middle of the stake to allow access to the trampoline from the underside.

Video of the Day

Brought to you by LIVESTRONG
Brought to you by LIVESTRONG
Cite this Article A tool to create a citation to reference this article Cite this Article

More Related Articles

Related Articles