How to Change Gears on a Schwinn Bike

By Rocco Pendola

As is the case with any brand of bicycle, including Schwinn, how you change gears depends on the style of bike you are riding. Different types of bicycles come equipped with different shifting systems. Shifting gears on a Schwinn beach cruiser or comfort-oriented bike is completely different than changing gears on a Schwinn road or mountain bike. Thankfully, shifting gears on a bike is something just about anybody can do.

Grip Shifters

Step 1

If you own a Schwinn beach cruiser or comfort-oriented hybrid bicycle, it might come equipped with what is called a grip-shift system. Look at the portion of your handlebars where you place your hands when riding, known as the grips. At the end of each grip, going toward the center of the bicycle, you will find a mechanism that can be turned, almost like a throttle, in increments. This is the grip-shift.

Step 2

Ride your bicycle at a comfortable pace. Place your right hand on the grip-shift located at the end of your right grip. Click the shifter in the direction you desire as if you are moving the throttle of a motorcycle. To shift up into a harder gear, click the shifter away from you. To shift down into an easier gear, click the shifter toward you. Shifting on the right side of the bicycle controls the gears located on the rear wheel.

Step 3

Repeat this process with the shifter located at the end of the left grip. Note: Some bicycles will have gears on the rear wheel only. If this is the case, there will be no shifter on the left side. If there is a shifter on the left side, manipulating it will change the gears located on the crank of your bicycle (the crank is the part to which your pedals are attached).

Trigger Shifters

Step 1

On many Schwinn fitness-oriented road bikes and on most mountain bikes, you will find trigger-style shifters. These systems operate with two levers per shifter.

Step 2

Locate the shifter levers on either side of your handlebars, remembering that the left-side shifter controls the front gears (usually two or three speeds) and the right-side shifter controls the rear gears (usually between five and 10 speeds).

Step 3

Push the bottom lever to shift the bicycle up to a higher gear. Pull back on the top lever to shift the bicycle to a lower gear. Repeat on the other side.

Race Bike Shifters

Step 1

On newer model Schwinn road-racing bicycles, the levers used to change gears are part of the levers used to apply braking power to your bicycle. The right set of levers still controls the rear gears. The left set of levers still controls the front gears.

Step 2

Place your hand over the brakes when riding the bike as if you plan to stop the bicycle. Instead of applying the brakes, feel the two levers that sit right behind the brake lever.

Step 3

Click the shifter lever closest to the brake lever. This lever will usually shift the bike up into a higher gear. Clicking the next shift lever--the one closest to you and furthest from the brake lever--will shift down into a lower gear. Repeat on the other side.

Vintage Schwinn Shifting

Step 1

On old Schwinn road bicycles, gear shifters are often located on the bicycle frame's downtube. The downtube is the portion of the frame below the top tube and closest to the ground that connects to the crank assembly.

Step 2

Click the lever on the right side of the downtube. Pressing it forward will shift the bicycle up into a higher gear. Pulling it backward toward you will shift the bicycle down into a lower gear.

Step 3

Repeat this process on the left side to control the gears located toward the front of the bike.

References

About the Author

As a writer since 2002, Rocco Pendola has published numerous academic and popular articles in addition to working as a freelance grant writer and researcher. His work has appeared on SFGate and Planetizen and in the journals "Environment & Behavior" and "Health and Place." Pendola has a Bachelor of Arts in urban studies from San Francisco State University.

Related Articles

More Related