How to Build a Wing Chun Wooden Dummy

By Contributor

A Wing Chun Wooden dummy can be a useful tool when you're training for this martial art. Ordering a Wing Chun dummy from a sporting goods or martial arts store can be expensive. However, you can build your own. Read this eHow to learn more.

Draw a plan for your wooden dummy, so you know the exact dimensions of your wooden parts.

Buy a telephone pole from a lumber yard. Call ahead to make sure they have one in stock. Inquire also whether the pole had been kiln dried, as this dries out any sap or moisture in the wood. Buy a section of a pole that's 9.5 inches in diameter and approximately your height.

Form arms for the Wing Chun dummy from whatever wood you choose. The wood should be pretty hard, like oak, or you can use several 2 inch x 4 inch boards pressed and glued together. Round the arms on a lathe or with a grinder. Sand until they're smooth. Tape the end of the arms so they it can be fitted to the trunk of the Wing Chun dummy and absorb some of the impact.

Drill holes for the arms with a power drill, cut slots in the mounting portion of the arms for the holding shims. The fit should be somewhat loose, with about a half-inch of movement on either side. Cut small pieces of wood to use as shims that will hold the legs and arms in place.

Form the single leg of the traditional wooden dummy in a similar manner as the arms. This step is somewhat more difficult, as the leg has a bend in it. Some people use a three-legged version of the dummy for more training options.

Sand and finish the wood with stain to preserve the wood.

About the Author

This article was written by the Healthfully team, copy edited and fact checked through a multi-point auditing system, in efforts to ensure our readers only receive the best information. To submit your questions or ideas, or to simply learn more about Healthfully, contact us here.

Related Articles

More Related